About this item

• VERSATILE AND COMPATIBLE WITH OTHER PRODUCTS: Filling your wood grain before you stain not only creates that beautiful smooth finish you are looking to achieve it will also seal the pores and help minimize absorption of your top coat, saving you time and money. Aqua Coat Clear Grain Filler can be mixed with water soluble pigments/dyes.
• WATERBORNE AND ECO- FRIENDLY: Our entire line of products are MADE IN THE USA, low VOC, low odor, non-flammable, non-combustible, water-based fast drying, easy to apply, easy sanding, excellent adhesion, water clean up, environmentally friendly. This makes it the healthier option for your employees and your family. Achieve that beautiful glass smooth finish while keeping the environment and your health in mind.
• LONG LASTING- A little goes a long way. You can use one quart to do 2 coats on a medium sized kitchen (30-40) drawers and doors. 1 Pint used on 5-6 Guitars.
• DESIGNED WITH EVERYONE IN MIND: From the DIYer to the contractor this is the perfect product to fill the grain and seal the pores of wood before or after staining or on raw wood to get a smooth finish on oak, ash, mahogany, walnut and other porous woods. A favorite product for tabletops, desktops, cabinets, vanities, millwork, pianos, guitars and furniture refinishing. For that glass smooth finish, start and finish all your hard to fill wood projects with Aqua Coat
• SIMPLE APPLICATION - Generously apply the Clear Grain Filler into the exposed wood grain and pores, working against the grain using a small squeegee, bondo blade, an old credit card, or your gloved fingers. Remove any surplus filler by scraping it off with a squeegee, bondo blade, or old credit card in the direction of the grain. Allow it to dry for 45-60 minutes. Gently sand the surface with 320-grit sandpaper or finer, or use a fine Scotch-Brite pad just before your subsequent grain filler application. It is advisable to apply 2-3 coats.